Welcome to the BrewPi Store!

Mashing

Our mashing setups are "Bring Your Own Kettle": we are going to offer all the parts you need to build an awesome RIMS or HERMS, except kettles. They are just too big to ship internationally.

We offer coils, inlets, outlets and dip tubes with BSP fittings with integrated O-ring groove. We designed these fittings to make them very easy to install: just make a 21mm hole in your kettle, insert the fitting and put a lock nut on the outside.

The integrated O-ring groove will guarantee a good seal and a well protected O-ring: the kettle is sealed on both sides and once tighened, the O-ring is competely hidden behind stainless steel!

We have our custom kettle inlets, whirlpool inlets, dip tubes, Lauterhexe and HERMS coils in both BSP and NPT.

 

BrewPi Fitting and locknutBrewPi Fitting closedBrewPi Fitting with ball valve

Please check out the video below to see how these fittings are installed.

Pumps and motorized ball vavles will come in February/March. We are still testing and developing for those. See below for a photo of Elco's setup, the founder of BrewPi. Build details will be posted soon.

BrewPi Herms System

Grid List

Set Descending Direction

31-40 of 91

  1. Hose Clamp (12-22 mm)
    Excl. Tax: €1.40 Incl. Tax: €1.69 As low as: €1.33
    Extra wide stainless steel hose clamp for hose diameter 12 - 22 mm Learn More
  2. Tri-Clamp heating element for brewing - 35 cm - 3200W in 2 loops - 2 inch clamp (64 mm)
    Excl. Tax: €105.00 Incl. Tax: €127.05
    Tri-Clamp low watt density heating element for brewing. Learn More
  3. Tri-Clamp heating element for brewing - 42 cm - 5000W in 2 loops - 2 inch clamp (64 mm)
    Excl. Tax: €119.00 Incl. Tax: €143.99
    Tri-Clamp low watt density heating element for brewing. Learn More
  4. Tri-Clamp heating element for brewing - 30 cm - 2800W in 2 loops - 2 inch clamp (64 mm)
    Excl. Tax: €99.00 Incl. Tax: €119.79
    Tri-Clamp low watt density heating element for brewing. Learn More
  5. Tri-Clamp heating element for brewing - 52 cm -  10000W in 3 loops - 2 inch clamp (64 mm)
    Excl. Tax: €145.00 Incl. Tax: €175.45
    Tri-Clamp low watt density heating element for brewing. Learn More
  6. Bulkhead fitting kit (1/2" NPT)
    Excl. Tax: €18.00 Incl. Tax: €21.78
    Stainless steel fitting with double O-ring seal. Hole on the inside, male NPT thread on the outside. Learn More
  7. 1" NPS locknut for Camco heating element
    Excl. Tax: €5.00 Incl. Tax: €6.05
    Stainless steel locknut with round face, 8 mm thick. Learn More
  8. 1/2" BSP Elbow (female - female) - 45 degrees
    Excl. Tax: €2.20 Incl. Tax: €2.66
    Stainless steel elbow, 2x 1/2" BSP female thread. Learn More
  9. 1/2" BSP Elbow (male - female) - 45 degrees
    Excl. Tax: €2.40 Incl. Tax: €2.90
    Stainless steel elbow, 1/2" male to female BSP thread. Learn More
  10. 1/2" BSP 3-piece Coupler
    Excl. Tax: €4.00 Incl. Tax: €4.84
    1/2"BSP hex coupler that can be easily installed and taken aparrt Learn More

Grid List

Set Descending Direction

31-40 of 91