Mashing
Our mashing setups are "Bring Your Own Kettle": we are going to offer all the parts you need to build an awesome RIMS or HERMS, except kettles. They are just too big to ship internationally.
We offer coils, inlets, outlets and dip tubes with BSP fittings with integrated O-ring groove. We designed these fittings to make them very easy to install: just make a 21mm hole in your kettle, insert the fitting and put a lock nut on the outside.
The integrated O-ring groove will guarantee a good seal and a well protected O-ring: the kettle is sealed on both sides and once tighened, the O-ring is competely hidden behind stainless steel!
We have our custom kettle inlets, whirlpool inlets, dip tubes, Lauterhexe and HERMS coils in both BSP and NPT.
Please check out the video below to see how these fittings are installed.
Pumps and motorized ball vavles will come in February/March. We are still testing and developing for those. See below for a photo of Elco's setup, the founder of BrewPi. Build details will be posted soon.
-
Excl. Tax: €29.00 Incl. Tax: €35.0925cm long kettle inlet with two 90 degree bends and 1/2" BSP fittings with integrated O-ring Learn More -
Excl. Tax: €33.00 Incl. Tax: €39.9345cm long kettle inlet with two 90 degree bends and 1/2" BSP fittings with integrated O-ring Learn More -
Excl. Tax: €31.00 Incl. Tax: €37.5135cm long kettle inlet with two 90 degree bends and 1/2" BSP fittings with integrated O-ring Learn More -
Excl. Tax: €33.00 Incl. Tax: €39.9345cm long kettle inlet with two 90 degree bends and 1/2" NPT fittings with integrated O-ring Learn More -
Excl. Tax: €29.00 Incl. Tax: €35.0925cm long kettle inlet with two 90 degree bends and 1/2" NPT fittings with integrated O-ring Learn More -
Excl. Tax: €31.00 Incl. Tax: €37.5135cm long kettle inlet with two 90 degree bends and 1/2" NPT fittings with integrated O-ring Learn More -
Excl. Tax: €18.00 Incl. Tax: €21.78Out of stock
Stainless steel fitting with double O-ring seal. Hole on the inside, male BSP thread on the outside. Learn More -
Excl. Tax: €115.00 Incl. Tax: €139.15Tri-Clamp low watt density heating element for brewing. Learn More -
Excl. Tax: €129.00 Incl. Tax: €156.09Tri-Clamp low watt density heating element for brewing. Learn More -
Excl. Tax: €339.00 Incl. Tax: €410.19Round stainless steel ultra low watt density heating element for brewing, 70 cm diameter, 15000W.
Learn More